Delivery & Return:Free shipping on all orders over $50
Estimated Delivery:7-15 days international
People:9 people viewing this product right now!
Easy Returns:Enjoy hassle-free returns within 30 days!
Payment:Secure checkout
SKU:71558983
Preparation: All surfaces must be clean and free of dust, dirt, oils, and grease. Make sure the surface is sound and free of loose or flaking paint. It is highly recommended to prime the surface with the correct primer in accordance with the substrate. Do not paint over shiny, smooth surfaces, such as plastic or glossy oil-based paints, unless prepared with the right primer. Application Methods: Meoded Sapphire Metallic Paint can be applied with a brush, roller, or sprayed. Work quickly in one direction, from joint to joint, keeping a wet edge while working. Spraying may require thinning with water; do not over-thin. Two or more coats are usually required to obtain the desired look. Apply only during temperate conditions: 50° to 90°F and between 25% and 75% relative humidity. Higher temperatures and lower humidity may cause the paint to lose its wet edge. Spraying: To spray Sapphire Metallic use an HVLP or Conventional cup gun. Thin with up to 10% water, 12 fluid ounces of water to one gallon of paint. Use a Titan Capspray 115, Maxum 2 gun with a needle size #3 or a Titan CAT-X Gun with the fluid and air supply from a compressor. Use a needle size 1.5 and a #24-1352 air cap. Recommended air pressure at the gun, is approximately 25-35psi, with greater pressure at the tank, approximately 75-90psi. For best results apply 3 coats in a cross-hatch pattern. Provide adequate ventilation. Sealer: For exterior application, it is recommended to protect Sapphire Metallic Paint with Meoded Cristallo Clear Coat. Two coats will usually provide adequate protection, while three coats are recommended for high-traffic areas. Sapphire Metallic was developed as the finishing touch for all decorating projects The color is created by adding fine metallic flakes to the paint mixture, which gives it its metallic appearance Whether in homes, offices, or commercial spaces, Sapphire Metallic will give surrounding areas an heir of sophistication fitting even for royalty Sapphire Metallic is an advanced water-based formula made with fine mica powders giving surfaces a beautiful pearl luster One Quart covers approximately 75 sq. ft for two coats One Gallon covers approximately 300 sq ft for two coats Meoded Sapphire Metallic is an interior/exterior unique Low VOC pearlescent paint that gives walls, metal, trim, furniture, or any other paintable surface a rich, opulent look of shimmering satin
Proper preparation and application; can be applied with a brush, roller, or HVLP sprayer; the surface should be thoroughly cleaned and prepped to ensure proper adhesion; any rust, dirt, grease, or other contaminants should be removed to prevent defects in the final finish
Unique shine and luster; can add an extra level of beauty, elegance, a touch of sophistication, and luxury to the surface; two or more coats are usually required to obtain the desired look
Versatile; finishing touch for all decorating projects, both interior and exterior applications; can also help to protect the surface from environmental elements like rain, snow, UV rays, and hide small imperfections in the surface
Use high-quality paint materials high-quality paint primer, paint, and clear coat; can create a beautiful and long-lasting finish that will stand the test of time
Advanced water-based formula; made with fine mica powders giving surfaces a beautiful pearl luster with less environmental impact